ST600 2018-01-10T17:46:53+00:00

ST600 – Vehicle Tracker 

The ST600 is a feature-rich vehicle tracking device equipped with a cellular modem which enables the device to deliver high speed communication functionality so fleets can keep up with real-time information and tracking of all assets in the field.

The ST600 not only transfers more data in the same amount of time to its server but also gets wider coverage than that of ordinary GPS device. The robust functionality the ST600 make this device ideal for applications where large amounts of data need to be transferred.

By configuring the event parameters of the ST600, its users may include various events such as automatic accident reporting, door locking, panic button signal, temperature recording, audio, RS232, ADC, voice, and other event options.

The ST600 can also send critical information directly to the telematics server and trigger various functions such as speeding alerts or engine immobilization. The ST600 is ideally suited for the vehicle financing industry, stolen vehicle recovery, buy-here-pay-here car dealers, fleet management and various other vehicle applications.

Frequency / Sensitivity UMTS/HSPA+ 850/1900 MHz
GSM 850/1900 MHz
GPRS Communication TCP / UDP
GPRS Multi-slot Class 12
Support all 4 coding schemes (CS-1, CS-2, CS-3 and CS-4)
AT Command GSM 07.07, 07.05
Command / Report sent via SMS Supported
Back-up Server Supported (via dual IP)
GPS Receiver 56 channel (SMAS : WAAS, EGNOS, MASA)
GPS&QZSS L1 C/A, Galileo E1B/L1, Compass ready
A-GPS support
GPS Sensitivity Tracking        -162 dBm
Reacquisition -160 dBm
Cold start      -148 dBm
4 Event Inputs 1 Input : 1 Ignition
3 Inputs : Available for Panic button, Door sensor
3 Event Outputs Vehicle Blocking
Open drain output up to 300mA, Available for Siren
Optional Input 1-Wire (I-button, Temperature sensor, RFID Reader)
1 Serial Port General RS232 , RFID Reader(RS232 type)
Housing Dimension 90.5(W) × 58(L) × 26(T) mm
Weight 100g (witd back-up battery)
Power Supply DC 8 V ~ 33 V, Main power +/- inversion protection
Power Consumption Active mode                  : 70~80mA @12V
Typical (3min. reporting)  : 40~50 mA @12V
Sleep mode                   : Approx. 2mA @12V
Back-up Battery Rechargeable 3.7V,  Ni-MH 450mAh
Electric Protection Protection against ESD and overvoltage
Operational Temperature Range -30˚C ~ +80˚C
Certificates CE, FCC, PTCRB, RoHS
Frequency 850 / 1900 MHz for GPRS/EDGE
850 / 1900 Mhz for UMTS/HSPA
Frequency (Optional) 900 / 1800 MHz for GPRS/EDGE
900 / 2100 Mhz for UMTS/HSPA
Power Power Class 3 (24 dBm) for WCDMA(HSDPA/HSUPA)
Power Class 4 (33 dBm) for GSM850 bands
Power Class 1 (30 dBm) for PCS bands
Packet Switched Data Rate HSUPA category 6, up to 5.76 Mb/s UL
HSDPA category 8, up to 7.2 Mb/s DL
WCDMA PS data, up to 384 kb/s DL/UL
GPRS multi-slot class 12, CS1-CS4 up to 85.6 kb/s DL/UL
EDGE multi-slot class 12, MCS1-MCS9 up to 236.8 kb/s DL
MCS1-MCS4 up to 70.4 kb/s UL

Housing Dimensions 90(W) x 58(L) x 26,2(T) mm
Weight 76g (w/o backup battery)
115g (w/w backup battery)
Certificates PTCRB, Telcel
Operating Temperature -30 ~ +80℃
Power Supply DC 8V ~ 33V *Main power +/- inversion protection
Electric Protection Protection against ESD and overvoltage
Back-up Battery Rechargeable 3.7V, Ni-MH 450mAh
Antenna Type Internal GPS antenna, Internal GPRS antenna
Motion detection Built-in 3-axis accelerometer
Data storage 2000 locations for lost coverage scenario
Communications TCP/UDP
Setting mode by USB cable or GPRS or SMS
Firmware upgradable remotely (OTA: Over-The-Air)
Power consumption Active mode 70~80 mA@12V
Sleep mode less tdan 2 mA @12V
Event Inputs 1 Input dedicated for ignition, and,
3 Inputs for general purposes
Event Outputs 2 Outputs, Open drain output of upto 300mA
for siren, vehicle blocking
Optional Event RS232, 1-Wire (temperature sensor & i-button), Voice, RPM, Odometer, CANbus, Vehicle power, DC5 or DC 3,3 Volt power supply port for an external application, Passenger Counter